DIRECTIONS TO USE
Always clean the surface before application to remove any loose particles or laitance.
Ensure that the surface is solid (hard and rigid) for the given application and free from voids, holes, and cracks.
Pre-wetting of blocks.
Ensure surface is well saturated before application.
Mix 3 parts of COSMOLITE to 1 part water (by volume) and mix to smooth, workable stiff paste.
Always add the powder to water.
Allow the mix to stand for 2-3 min for the paste to mature.
Do not add water to the already mixed mortar to extend the pot life.
Put well-mixed COSMOLITE on the block with the help of trowel, spread mortar uniformly on the unit for a 3mm bed thickness.
Firmly place the block with slight shear to ensure proper transfer and bonding.
COSMOLITE to be applied on the block and on column and beam for good bonding at the joints.
